|
OBJECTIVE
|
|
|
Looking for full-time employment in Mechanical Engineering / Control for May 2015.
|
|
PROFESSIONAL SUMMARY
|
|
|
|
- Extensive background in Mechanical and Control engineering areas.
- Experienced in estimation, synchronization and control of multi-agent systems.
- Experienced in offshore drilling, well-logging and directional drilling.
- Delivered professional engineering activities in a highly competent and efficient manner and ensured that the technical and safety integrity of the engineering is maintained while completing the tasks.
- Reliable, diligent and self-motivated, excellent communication and organizational skills.
|
|
EDUCATION:
|
|
|
PhD, Mechanical Engineering January 2012 – May 2015
Worcester Polytechnic Institute, Worcester, MA GPA: 4.0/4.0
Dissertation: "Adaptive distributed observers for a class of linear time-varying systems".
|
|
|
M.Sc., Mechanical Engineering/ Applied Mechanics September 2007 – January 2010
Sharif University of Technology, Tehran, Iran (Rank 1st in Engineering between Iranian Universities)
Dissertation: "Vibration analysis of a cracked Timoshenko beam with a continuous model for crack".
|
|
|
B.Sc., Mechanical Engineering/ Solid Mechanics & Design September 2003 –June 2007
Azad University of Mashhad, Mashhad, Iran
Thesis: "Studying the properties of all six-stroke engine types".
|
|
INDUSTRIAL EXPERIENCE:
|
|
|
Field Engineer October 2010 –November 2011
Schlumberger Oilfield Limited, Drilling and Measurement (D&M) segment, Kish Island, Iran
- Worked with both MWD (measurement while drilling) and LWD (logging while drilling) tools. These tools are the most advanced tools used in logging and directional drilling.
- Acquired and delivered high-quality formation evaluation, wellbore quality data and directional drilling service to clients.
- Led D&M team and was responsible for operation monitoring, equipment on-site maintenance, logistics, contingency plan-making and failure analysis.
- Coordinated other service providers, provided technical solutions, including adjusting drilling parameters and mud property according to real-time situations for risk-control and drilling optimization.
|
|
|
Technical Engineer February 2010 – August 2010
Delta Sanat Sharif, Tehran, Iran
- Consulted clients in the field of machinery condition monitoring based on vibration technique, thermography technique.
|
|
|
Summer Internship Summer 2007
Majmoueh Sazi Toos Co., Mashhad, Iran
|
|
TECHNICAL SKILL & EXPERTISES
|
|
|
Programming: Matlab/Simulink; Fortran; C/C++;
Applications: SolidWorks; Catia; Ansys; Maple; MS Office; Latex; Comsol; Abaqus; LabVIEW; Mathcad;
Applied Skills: MWD; LWD; Well-logging; Offshore drilling; Directional drilling; Rotor dynamics; Condition monitoring; Fault diagnosis of rotating machineries;
|
|
TEACHING EXPERIENCE
|
|
|
Teaching Assistant, Worcester Polytechnic Institute January 2012 – Present
Held conference sessions and office hours, taught lab sessions, prepared course and lab materials, and graded assignments for the following courses:
|
|
|
- Introduction to Static Systems
- Spacecraft Dynamics & Control
- Guidance, Navigation & Communication
- Introduction to Control of Dynamical Systems
- Introduction to Engineering Design
- Stress Analysis
- Control Engineering I
- Introduction to Dynamic Systems
- Mechanical Vibration
- Modeling & Analysis of Mechatronic Systems
- Kinematics of Mechanisms
|
|
|
ACADEMIC RESEARCH EXPERIENCE
|
|
|
Ph.D. Dissertation January 2012 – Present
Title: Adaptive distributed observers for a class of linear time-varying systems.
- Designed adaptive Kalman consensus filters for a class of continuous time linear time-varying systems.
- Designed adaptive Kalman consensus filters for a class of discrete time linear time-varying systems.
- Designed adaptive unknown input consensus observers for a class of continuous time linear systems.
- Designed adaptive functional consensus observers for a class of continuous time linear systems.
|
|
|
M.Sc. Dissertation 2007-2010
Title: Vibration analysis of a cracked Timoshenko beam with a continuous model for crack.
- Studied of Timoshenko (short) beams for crack in the horizontal and vertical faces using a most recently developed continuous model for crack in the beams and rotor.
- Studied the effect of crack properties on the dynamic behavior of cracked beams.
- Examined forced vibration of cracked Timoshenko beams.
|
|
|
Research Assistant, 2008 –2010
Condition Monitoring & Fault Diagnostics Center, Sharif University of Technology
- Worked on industrial projects in the field of condition monitoring of industrial machineries.
|
|
JOURNAL PUBLICATIONS
|
|
|
- Heydari, S. Jani; "An ellipsoidal model for head to studying response of impacts", Acta of Bioengineering and Biomechanics 12 (1), 2010, 47-53.
|
|
|
- Heydari, H. Salarieh, M. Behzad, "Stochastic chaos synchronization using unscented Kalman-Bucy filter and sliding mode control", Mathematics and Computers in Simulation 81 (9), 2011, 1770-1784.
|
|
|
- Behzad, A. Ebrahimi, M. Heydari, A. Alasti, M. Asadi, "Experimental investigation on the fault diagnosis of DC electro motors", Insight – Non-Destructive Testing and Condition Monitoring 55 (8), 2013, 422-427.
|
|
|
- Heydari, A. Ebrahimi, M. Behzad, "Continuous model for flexural vibration analysis of a Timoshenko cracked beam", Archives of Mechanics 65 (4), 2013, 265–288.
- Ebrahimi, M. Heydari, M. Behzad, "A continuous vibration theory for rotors with an open edge crack", Journal of Sound and Vibration 333 (15), 2014, 3522–3535.
|
|
|
- Heydari, A. Ebrahimi, M. Behzad, "Forced vibration analysis of a Timoshenko cracked beam using a continuous model for the crack", Engineering Science and Technology, an International Journal 17 (4), 2014, 194-204.
- Heydari, A. Ebrahimi, M. Behzad, "Continuous model for flexural vibration analysis of Timoshenko beams with a vertical edge crack", Archive of Applied Mechanics, 2014, DOI: 10.1007/s00419-014-0933-z.
- Ebrahimi, M. Heydari, M. Behzad, "Forced vibration analysis of rotors with an open edge crack based on a continuous vibration theory", Submitted.
- Ebrahimi, M. Heydari, M. Behzad, "Optimal vibration control of rotors with an open edge crack using an electromagnetic exciter", Submitted.
- Ebrahimi, M. Heydari, A. Alasti, "Active control of a passive bipedal walking robot", Submitted.
- Salem, M. Heydari, M. Agheli, "A new approach in modeling of guide and conical rolls in ring rolling process", Submitted.
- Heydari, M. Demetriou, "Distributed Kalman filters with adaptive strategy for linear time-varying interconnected systems", Submitted.
- Heydari, M. Demetriou, "Adaptive strategies for interconnected functional observers", Ready for submission.
- Heydari, M. Demetriou, "Unknown input consensus observer for a class of linear descriptor systems", In preparation.
|
|
HONORS & AWARDS
|
|
|
- Ranked 24th amongst about 10000 participants in M.Sc. university entrance examination in Iran 2007 (Top 25 %)
- Ranked 3rd amongst nearly 200 students in Azad University of Mashhad
- 3rd “IMACS (International Association for Mathematics and Computers in Simulation) 2012 Most Successful Papers Award” for the paper entitled as "Stochastic chaos synchronization using unscented Kalman-Bucy filter and sliding mode control” published in “Mathematics and Computers in Simulation”.
- Honor member of IMACS (International Association for Mathematics and Computers in Simulation), 2012.
|
