Inspection/Quality Engineer Resume
Saravanan Nagarajan
A/F,
Kailasapuram Post,
Township, B.H.E.L., E-Mail: .
Trichy-., Contact No: --.
Tamil Nadu, India.
________________________________________________________________________
Educational Qualification : B.E. (Mechanical),
Bharathidasan University,
Tamil Nadu, India.
Additional Qualification : NDT Level II in ASNT
• Ultrasonic Testing.
• Radiography Testing.
• Magnetic Particle Testing.
• Liquid Penetrant Testing.
Professional Experience :
Overseas Experience : May – till now.
Eversendai Engineering : Work as QUALITY ENGINEER
Dubai, U.A.E.
Responsibility :
&#; Carry out inspection for incoming material in conformity with the specification and requirements and provide code no for traceability.
&#; Handle Two Projects Burj Dubai, Rose Tower and Carry Out Stage Wise Inspection Weld Visual, Dimensional Analysis, and Coordinate and Carry out NDT activities.
&#; Prepare QC Dossiers and review before submit to Client. Co-ordinate with Internal Audit team and carry out Auditing.
&#; Carry out Ultrasonic Testing according to ITP ( Inspection Test Plan ) for Structural Members ( S JR, K, SM ) Materials and Witness to client.
&#; Calibrate Equipments and Maintain Records.
Reliance Refinery : September - November
Jam Nagar, Gujarat. Work as INSPECTION ENGINEER during
Shunt Down
&#; Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers, Pipes, Piping, and Valves.
&#; Work in schedule Shutdown of Fluidized catalytic cracking unit (FCCU), Hydrogen Production unit, Crude distillation unit (CDU), Polypropylene unit, Aromatic plant.
&#; Preparation of various failure investigation reports on Stress Corrosion Cracking of Stainless Steel pipes, Creep Fracture of Heater Tubes and Hydrogen Induced Cracking of Vessels.
&#; Carry out Radiographic Interpretation as per acceptance standard ASME SEC VIII.
&#; Witness of Two Ply test on Bellows as per Piping Solution (Pathway Division) Procedures.
&#; Exposure to Plasma Arc Cutting Process.
&#; Co-ordinate to Perform Eddy Current Test of Fin-Fan Cooler Tube Bundles.
&#; Prepare Iso-Drawing of Pipelines.
&#; Monitor Pre-heat, post-heat and Stress relieving of CS, LAS and SS piping.
&#; Routine and shutdown inspection of Heat-Exchangers, Pressure Vessels, Columns, Heaters and Storage tanks.
&#; Involve in Modification Work of Regenerator and Reactor.
&#; Analyzing corrosion problems and methods of control.
&#; Exposure to Hot Tapping on Piping.
&#; Review of engineering drawings.
&#; Review of all reports and recommendations prior submission to plant inspector.
&#; Review of Reliance Industries (RIL) Limited Inspection policies and procedures.
&#; Follow fire, safety rules and regulations in oil refinery.
&#; Effectively communicating the technical aspects of engineering tasks to customer, technician and management.
&#; Witness Pneumatic test of Heat-Exchangers.
&#; Carry Out Internal Inspection of Heat-Exchangers, Pressure Vessels, Columns,
and Reformer.
Cairn Energy Pty Limited : January – May
Rawa Terminals, Work as INSPECTION ENGINNER
East Godavari Dt., in OFF-SHORE AND ON-SHORE.
&#; Witness Hydro test of Heat-Exchanger, Fin-Fan Coolers.
&#; Prepare Iso-Drawing.
&#; Witness Ultrasonic Testing.
&#; Carry Out Dimension Analysis in Off-shore i.e., in ALPHA PLATFORM.
&#; Involve in Corrosion Monitoring Inspection of Pipelines in Off-Shore and On-Shore using Torsion Waves.
&#; Carry out internal Inspection for Corrosion.
Thermal Power Station : st January – th January .
Mettur, Salem. Work as QUALITY ENGINEER
(MW) during RLA (Residual Life Assessment)
Program.
&#; Inspect Turbine Casing i.e., (High Pressure Casing, Intermediate Casing, Low Pressure Casing), and Turbine Blades, And Diaphragm.
&#; Carry Out Ultrasonic Testing on Turbine Casing, and Rotor Journals.
&#; Conduct Visual and NDE Methods to Inspect Boiler Drum and Pent house.
&#; Carry Out Hardness Test in Turbine, Boiler Drum and Ring-Header, Using Dynapocket.
&#; Carry Out Dimensional analysis of Pipes.
&#; Involve in Documentation Work.
&#; Co-ordinate to Perform Replica.
Bharat Heavy Electrical’s : September - September
Limited, Trichy. Work as QUALITY ENGINEER in Quality
Control Department.
&#; Inspect and Perform (Ultrasonic Testing, Radiography Testing, Magnetic Particle Testing, Liquid Penetrant Testing and Visual Inspection) on Boiler Drum, Nuclear Components, Pipes, Header’s, Tubes and Castings(Valves) According to Code’s and Standard’s.
&#; Perform Ultrasonic Testing on Stainless Steel Plate using Angle Beam (Longitudinal), and on Carbon Steel and Alloy Steel.
&#; Witness Ultrasonic Testing to BRC (Baba Atomic Research Centre) and NTPC (National Thermal Power Corporation).
&#; Perform Radiography Using Gamma Ray (Cobolt , Ir ), X-Ray.
&#; Involve in Real Time Radioscopy and High Energy Radiograph for High Thickness material using LINAC (Linear Accelerator).
&#; Interpret and Evaluated the Film’s.
&#; Perform Magnetic Particle Testing and Liquid Penetrant Testing on Pressure Part’s and Structure Part’s.
&#; Involve in Certification of New Brands (Quality and Sensitivity Test )
&#; Perform Destructive & Non –Destructive Testing Before & After Stress – Relieving Process.
&#; Calibrate the Equipments according to Code’s and Standard’s.
Rasab Engineering : May - September
Works, Trichy. Work as QUALITY ENGINEER.
Responsibilities:
&#; Inspection of raw materials and Inspection of components at the sub-contractor premises.
&#; Carrying out various stage inspections during manufacturing.
&#; Coordinating with Third party agency, Preparation of Inspection reports, Verification of test reports and Completion of inspection booklets.
&#; Responsible for Welding processes Viz. SMAW, SAW, GTAW, GMAW, and FCAW.
&#; Understanding design concepts and translating them into production process that meets factory goals for cost, quality and schedule.
&#; Carry out Structure Works (Edge Preparation, Welding Fit-up, Machining Process).
&#; Involve in Preparation Boiler Duct Component’s.
&#; Involve and Performed Wind Mill Tower(i.e. Visual Inspection ).
Welding Research : January – March
Institute, Trichy. Performed PROJECT WORK.
&#; Study and Perform Metal Active Gas Welding on SA GR Plate.
&#; Involve in Stress-Relieving Analysis.
&#; Perform Heat – Treatment.
&#; Involve in Specimen Preparation for Destructive Testing According to ASTM.
&#; Perform Mechanical Testing (Tensile Test, Hardness Test, Micro-Structure Test, Macro-Structure Test and Impact Test).
&#; Mechanical Testing are conduct Above and Below Room Temperature.
Software Skills :
• M.S.Office.
• Auto-Cad.
• C,C++
• Visual Basic.
• Ansys.
Personal Profile :
Date of Birth : --.
Father’s Name : Nagarajan.V.
Nationality : Indian.
Martial Status : Single.
Sex : Male.
Passport Details :
Passport Number : F.
Date of Issue : --.
Date of Expiry : --.
Driving License Details :
D.L.N.O.F/TN//O /.
Place:
Date: (N. SARAVANAN).
